computer repairing equipment tools name list
Use of equipment helps in accidents and damage to equipment and people. This section describes and covers the proper use of specific hardware, software and organizational tools to work with computers and peripheral devices.
The right tool for every job. Ensure that you are familiar with the right use of each device and the right tool is used for the current work. Efficient use of equipment and software makes job harder and ensures that the work will be done properly and safely.
A Toolkit should have all the tools needed to complete the hardware repair. As you gain experience, you learn which tools are available for different types of jobs. Hardware tools are grouped into four categories:
- ESD Equipment
- hand tool
- Cleaning machine
- Diagnostic tool
The tools needed to repair computers. He has given below.
Use the screw driver to open computers, laptops, printers, UPS etc., they come in many different types of markets, some have a MAGNET in the SCREW DRIVER. This makes it easy to lift the screw. Its price ranges from Rs 100 to 300.
It is used to lift any small device or component. It also comes in a lot of sizes, many of the TWISSOR contains insulating layer
Soldering Iron is used by any PCB to remove and fix any Electronics COMPONENT, it comes in many ways, ranging from 25WATT to 100W or more, it runs on electricity. It gets heated as soon as the electricity is available. Hence the solder melts
Use the solder wire to add any component
DESOLDERING WICK OR WIRE
Use it to remove solders from PCB. Mostly it is used to remove the component from the PCB. With the help of which there are many additions, all the solders are expelled from the PCB. Because this wire unloads the solder SOLDER
The hot solder is pulled by this pump.
SMD HOT GUN
This is used to make the smd component out of the PCB. This machine gets hot air. By which the solders melt and hold the component with a pinch and remove the component and apply it. Its price ranges from about Rs 1000 to Rs 3000
Multi-meter to VOLT, AMPERE, RESISTOR, CAPACITOR, COIL, DIODE, TRANSISTER etc. All Electronics Components are checked, it comes in two types.
- ANALOG MULTI-METER
- DIGITAL MULTI-METER
Other useful tools (MOTHERBOARD LAPTOP TESTER.)
MOTHERBOARD is made to DIAGNOSE with the help of this CARD, which means what is PROBLEM in it. Its address is easily addressed by POST code. By which it becomes easier to repair it, its price ranges from 300 to 500. It comes in many types.
CPU SOCKET TESTER
With this help checks the CPU socket of MOTHERBOARD. If the CPU SOCKET is defective, then with the help of this card, it gets to know
RAM SLOT TESTER
RAM slots are checked with the help of this tester
This Tool that helps BIOS get REPROGRAM